|
Product
|
Aplications
|
Features & Benefits
|
Test Data
|
|
Polyken 108 Flame Retardant Double-Coated Cloth Tape
Flame retardant double-coated cloth tape with flame retardant synthetic rubber adhesive.
Certifications
Boeing - Boeing BMS 5-133-C
FAA - FAR 25.853 (a)
View Product Data Sheet
|
For carpet installation on interior floors and stairs of aircraft. Used with confidence by Boeing, Douglas, Lockheed, major national and international airlines and refurbishers.
|
Designed with a flame retardant cotton cloth and synthetic adhesive systems that complies with F.A.R. 25.853 (a). Ease of installation. High strength, with quick-stick and high adhesion. Ease of tearability. High conformability. Flexibility allows for ease of realignment. Accommodates irregular surfaces. Performs without twisting or curling. Removes easily without leaving residue. Compliance with safety requirements. Immediate carpet bond with retained bond integrity.
|
Adhesion to Steel
|
60 oz/in
|
67.2 g/mm
|
|
Tensile
|
40 lb/in
|
0.71kg/mm
|
|
Thickness
|
14 mils
|
0.35 mm
|
|
Weight
|
13 oz/sq yd
|
441 g/ sq m
|
|
|
|
|
|
|
Polyken 108 Flame Retardant Cloth Duct Tape
A superior flame retardant polyethylene coated waterproof tape with an exceptionally aggressive adhesive to a variety of substrates including steel and plastic.
View Product Data Sheet
|
Used in areas where flame retardancy is required · For sealing duct work, fiberglass insulation, and wire harness insulation and building applications · Cargo pit applications for freight carrying aircraft.
|
Flame retardant polyethylene coated waterproof tape · Exceptionally aggressive adhesive to a variety of substrates · Exhibits outstanding handling characteristics and conforms well to duct systems · Conforms to FAR 25.853(a), McDonnell-Douglas DMS 1986D, Lockheed LCP-86-1226-A, and Boeing D 6-8099.
Special Conditions: waterproof, flame retardant
Certifications:
Boeing - Boeing D 6-8099 FAA - FAR 25.853 (a) Lockheed - Lockheed LCP-86-1226-A McDonnell-Douglas - McDonnell-Douglas DMS 1986D
|
Adhesion to Backing
|
25 oz/in
|
28 g/mm
|
|
Adhesion to Steel
|
40 oz/in
|
44.8 g/mm
|
|
Tack
|
2.5 in
|
6.35 cm
|
|
Tensile
|
29 lb/in
|
0.52 kg/cm
|
|
Thickness
|
12 mils
|
0.3 mm
|
|
Weight
|
10.5 oz/sq yd
|
356 g/sq m
|
|
|
|
|
|
|
Polyken 290 Flame Retardant Aircraft Cargo Compartment Tape
Printed, linerless, flame retardant glass cloth tape for aircraft cargo compartment seam sealing.
View Product Data Sheet
|
Cargo pit applications. Seam sealing (taping) and repair of cargo compartment liners for use on covering pins/rivets where high adhesion and flame resistance is critical.
|
Glass cloth design resists flame penetration for safety. High conformability. Easy to install and accommodates angles and turns. High adhesion properties eliminates lifting and curling. Creep resistance maintains seal under load. Visibility of F.A.R. 25.853(a) and F.A.R. 25.855(d) printed.
Special Conditions: waterproof, flame retardant
Certifications: FAA - FAR 25.853 (a)/FAR 25.855 (d)
|
Adhesion to Backing
|
32 oz/in
|
35.9 g/mm
|
|
Adhesion to Steel
|
38 oz/in
|
42.6 g/mm
|
|
Tack
|
2 in
|
5 cm
|
|
Tensile
|
150 lb/in
|
2.7 kg/mm
|
|
Thickness
|
13 mils
|
0.33 mm
|
|
Weight
|
10.9 oz/sq yd
|
370 g/sq m
|
|
|
|
|
|
|
Polyken 225FR Flame Retardant Duct Tape
A superior flame retardant polyethylene coated waterproof tape with an exceptionally aggressive adhesive to a variety of substrates including steel and plastic.
Certifications
Boeing - Boeing BMS 5-133-C
FAA - FAR 25.853 (a)
Boeing D 6-8099
FAA-FAR 25.853(a)
Lockheed LCP-86-1226-A
McDonnell-Douglas DMS1986D
View Product Data Sheet
|
Used in areas where flame retardancy is required · For sealing duct work, fiberglass insulation, and wire harness insulation and building applications · Cargo pit applications for freight carrying aircraft
|
Flame retardant polyethylene coated waterproof tape · Exceptionally aggressive adhesive to a variety of substrates · Exhibits outstanding handling characteristics and conforms well to duct systems · Conforms to FAR 25.853(a), McDonnell-Douglas DMS 1986D, Lockheed LCP-86-1226-A, and Boeing D 6-8099
|
Adhesion to Backing
|
25 oz/in
|
28 g/mm
|
|
Adhesion to Steel
|
40 oz/in
|
44.8 g/mm
|
|
Tack
|
2.5 in
|
6.35 cm
|
|
Tensile
|
29 lb/in
|
0.52 kg/cm
|
|
Thickness
|
12 mils
|
0.3 mm
|
|
Weight
|
10.5 oz/sq yd
|
356 g/sq m
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
