|
|
M974
|
Aluminum Foil
High-strength 2-mil aluminum foil coated with a special cold weather acrylic adhesive. Designed to combine superior, quick stick at normal temperatures, M974 is also offers superior low temperature performance at freezing (32F or 0C). The ultimate in cold weather tapes. Recomended for use in high temperature applications too.
Heat stable up to 260F (127C)
Field tested and recommended for application in conditions as low as -10F (-23C). Bond strenght increases after adhesion, due to self croll-linking properties.
Primary use: Improved vapor sealing of fiberglass ductboard, ductwrap and FSK system.
|
27
|
96
|
3.5
|
4.4
|
2”x 50yds
3”x 50yds
|
24
16
|
|
|
M975
|
ASJ - All Service Jacket
All Service Jacket Tape. White Kraft/Scrim/Foil lamination with 4x4/sq. in. tridirectional scrim reinforcement. Special cold weather acrylic adhesive system combines superior quick stick at normal temperatures with a superior low temperature performance down to -25F (-32C). Excellent at normal and high temperatures as well.
Primary use: Closure system and vapor seal on All Service Jacket faced duct and piping systems.
|
40
|
92
|
11.5
|
2
|
2”x 50yds
3”x 50yds
|
24
16
|
|
|
M977
|
FSK Foil/Scrim/Kraft
Tridirectionally reiforced with 2x3/sq.in fiberglass scrim, U.L. listed Foil/Scrim/Kraft lamination. Coated with a special cold weather acrylic adhesive system that combines very high quick-stick at normal temperatures with a superior low temperature performance. Recomended for use down to 10F (-12C) as well as normal and very high temperatures. Recomended for use in high temperature applications too.
Heat stable up to 260F (127C). Conforms well to both fibrous ductboard and blankets.
Primary use: Vapor seal on FSK fased fiberglass ductboard and blanket systems.
|
92
|
40
|
6.5
|
2
|
2”x 50yds
3”x 50yds
|
24
16
|
|
|
M978
|
Metalized Coated Duct Tape
Aluminumized, Coated Cloth, Silver.
Tri-directionally reinforced with 2x3sq.in. fiberglass scrim coated with a special cold weather adhesive system which combines quick stick at normal temps with superior low temp performance. Vapor seal on FSK faced fiberglass duct board, and blanket systems.
Made in USA.
|
36
|
55
|
10
|
-
|
2”x 50yds
3”x 50yds
|
24
16
|
|
|
M979
|
Aluminum Foil High Temperature Tape
Aluminum foil coated with a high shear, highly heat resistant, acrylic adhesive system. The soft foil conforms well to irregular surfaces.
Can be used to seal joints in most flue and chimney pipe installations. Withstanding temperatures -40F to 450F.
|
27
|
|
3.8
|
4.4
|
3”x 50yds
|
16
|
|
|
M181
A-P
|
Aluminum Foil Duct
Heavy duty, high strenght aluminum foil with specially formulated acrylic adhesive system. Performance and materials guaranteed to meet or exceed UL-181A-P and UL-181-FX quality standards, and assures against this tape a conductore of any flame.
|
25
|
66
|
4
|
4.3
|
2 ½”x 60
|
20
|
|
|
M181
B-FX
|
Printed Flexible Duct Closure
A polypropylene film with an acrylic, cold weather adhesive system. Will perform well in either sub-zero cold or abnormally warm temperatures. UL listed. Meets or exceeds all state building codes requiring UL-181B-FX. Colors: Black, Silver, Clear.
|
22
|
41
|
3
|
150 %
|
2”x 120yds
|
24
|
|
|
M970
|
Laminated Aluminum and Polyester Insulation Facing for Interior and Exterior Applications
Absolute vapor barrier, water and weather seal for use where traditional finishing constructions permit wet insulation and corrosion.
Additional characteristics: Enhanced chemical and UV Resistance to corrosion.
Aplication Temperature: 10F to 248F
Available in Silver, White, Black, Stucco .Embossed.
|
68
|
55
|
5.6
|
166 %
|
23”x 50yd
30”x 50yd
35½”x 50
46”x 50yd
|
1
1
1
1
|
