|
|
E500
|
Glass Cloth Tapes 500F ( 260C)
Woven foberglass backing coated with silicone adhesive. Ideal for power coating, thermal spray, and extended high temperature paint cures. Clean and easy removal. Resistant to high pressure blasting. Flame retardant.
|
|
|
std
|
|
1” x 36 yds
2” x 36 yds
|
12
6
|
|
|
M918
|
Powder Coat Polyester Tapes Green 400F( 204C)
Excellent dimensional stability, high tensile and extreme (-100o to 350o) temperature range. Ideal for low-cost masking for transformer & circuit board mfg, splicing, powder coating, E-coating, plating, and anodizing. and other high abrasive applications. Silicone adhesive.
|
|
|
3.5
3.5
3.5
|
|
¾”x 72yds
1”x 72yds
2”x 72yds
4”x 72yds
|
12
6
4
|
|
|
E350
|
Polyester Tapes 350F ( 177C)
1 mil polyester film with 3 mils of silicone adhesive. Ideal for powder coating, plating and anodizing. Recomended when potential leakage is of concern. Removes cleanly.
|
|
|
4.0
4.0
4.0
|
|
1”x 72yds
2”x 72yds
3”x 72yds
|
36
24
12
|
|
|
M520
|
Reinforced Teflon Coated Glass
Glass cloth impregnated with Teflon™ and silicone adhesive. Primary insulation for high heat and strength applications, including electrical, mechanical, chemical and thermal.
|
|
|
3
3
5
5
|
|
¾”x 36yds
1” x 36 yds
¾”x 36yd
s
1” x 36 yds
|
6
6
6
6
|
|
|
M901
|
Skived Teflon - PTFE Film
High temp silicone adhesive for low friction and non-stick properties. High elongation for tight wrapping and conformability to odd shapes and surfaces. -100o to 500o temp range.
|
|
|
2.5
2.5
2.5
|
|
3/8”x 36yds
1/2”x 36yds
1 x 36yds
|
12
12
6
|
|
|
M902
|
Kapton - Polyimide Film
Exceptional electrical insulating properties. For continuous high temp applications. Residue free protection. -100o to 500o temperature range, 7500 v. dielectric strength.
|
|
|
2.5
2.5
2.5
2.5
|
|
3/8”x 36yds
1/2”x 36yds
1”x 36yds
2”x 36yds
|
24
18
12
6
|
|
|
M934
|
High Modulus Teflon Film
for high temp applications-
|
|
|
2.5
2.5
|
|
1/2”x 36yds
1”x 36yds
|
6
4
|
|
|
M936
|
Silicone Glass
Exceptional tensile strenght and abrasion resistance. Thermal spraying, grit blasting, insulation gaskets, heat sealing. Silicone adhesive, -100F to 500F temp range.
|
|
|
4.5
4.5
4.5
|
|
1/2”x 36yds
1”x 36yds
2”x 36yds
|
12
6
3
|
|
|
M939
|
UHMW Film
Ultra high molecular weight polyolefin with acrylic adhesive. High resistance to abrasion, may be used in contact with food under Federal supervision. Outwears Teflon™ and is a good alternative when high temperature resistance is not required.
|
|
|
4.5
4.5
4.5
4.5
|
|
1/2”x 36yds
1”x 36yds
2”x 36yds
4”x 36yds
|
12
6
3
|
|
|
M970
|
Copper Foil
High conformability, conductivity & reflectivity at elevated temperatures. Thermal spraying, aircraft repainting sheielding & electroplating. Acrylic adhesive, -40F to 375F temp range.
|
|
|
3.5
3.5
3.5
|
|
1/2”x 36yds
1”x 36yds
2”x 36yds
|
12
6
3
|
|
|
M971
|
Glass Foil
For applications requiring high tear strenghts. Fiberglass laminated with aluminum. Silicone adhesive, -100F to 500F temp range.
|
|
|
4.5
4.5
4.5
|
|
1/2”x 36yds
1”x 36yds
2”x 36yds
|
12
6
3
|
|
|
M854
|
Magnetic
Indoor/out, acrylic adhesive for one-sided application to non-metallic surfaces.
|
|
|
|
|
1”x 100’x1/16”
2”x 100’x1/16”
|
2
1
|
